Just like other WiFi extender and WiFi router devices, you will enjoy the WPS configurations for amped wireless REC10 device. This advance WiFi extender device support WPS configurations for push button and web browser based setup. WPS is also known as WiFi protected setup window where you can easily add a new device to your home network and enjoy WiFi connections for your devices. There will be no long configurations for your device and you will need only few seconds for adding your amped wireless REC10 device to your home network.
- If you want to use the WPS configurations for your amped wireless REC10 device then you can either push the physical button from your Amped device or you can access the WPS button from your page.
- If you want that you can manage the settings for your device then you will first need to connect your WiFi extender and router device using the cable and then you can access http:// setup.ampedwireless.com web address.
Once your amped wireless REC10 device added to the home network, you will also need to manage the advance WiFi settings for your device. But, you must be an expert in networking if you want to manage these settings because if you configure even a single configuration in a wrong way, you can’t find the internet connections for your wireless devices. Here is the list of the advance WiFi settings that you will need to manage for your amped wireless REC10 WiFi extender device.
- If you want that your WiFi extender device must receive the data packets in blocks then you will need to configure the “STBC” option for your device.
- If you want to enable the cycle redundancy check for between the WiFi extender device and the users that are connected to it, then you will need to configure the “Preamble Type” security for your device.
- If you want to that your WiFi extender device must fragment the data packets that it is going to send to the users that are connected to your network.
These are advance settings so make sure that you can smartly handle all these settings for your device. If can’t handle such kind of advance WiFi settings and then it is recommend that you must connect any networking expert for such kind of configurations. From the user manual you can get possible help for these settings.
Changing the Time Settings for your Amped WiFi Extender Devices
Before you manage the “Access Schedules” for your Amped extender device, you have to make sure that time settings are correct for your device. If you find that your WiFi extender device is not having correct time settings, you have to go for the “Management” page for your extender device and then find the “System Clock” option from there. Make sure that your computer device and WiFi extender device is having the correct time settings.
Default Configurations for your Amped WiFi Extender Device
A brand new WiFi extender device will have default configurations but later you can change these settings easily.
Default IP Address for Amped Wireless rec10 extender device
Default Login Address for Amped Wireless rec10 extender device
Default WiFi Extension for WiFi Extender Device
If you want to secure your device, you have to change these default settings for your device. You can change the domain name for your WiFi extender device and use that domain for accessing the smart setup for your device. The WiFi extension can also be reconfigured and this will be known as SSID for your device.
If you can’t access the Amped wireless device using the wireless technology then you have to make sure that your extender device supports the WPA2 WiFi security settings. You can easily change the WiFi security settings for your device using http:// setup.ampedwireless.com web address. Connect your WiFi extender device directly to your computer device and you can connect then Ethernet cable and access the WiFi extender login page. If you are successfully accessing the setup page for your device that means your router device is having internet connectivity issues.
Check the DHCP settings for your Amped wireless device and from there find the IP address for your extender device. May be you have changed the login IP for your device and in that case you will need to use this new login address for accessing the smart setup for your device. Using the rest button you can reset your device to default configurations and access the login page using http:// setup.ampedwireless.com web address. Default IP address for accessing the login page is http:// 192.168.3.1 and there is no default password required for WiFi extender login.
Once you add your WiFi extender device to your home network, you have to change the WiFi access password for your device. Remember that there is no default password for WiFi access so you will need to change the WiFi access password manually for your device. If you want to change the WiFi access password for your Amped extender device then first make the login for your device using http:// setup.ampedwireless.com web address. Go for the “More Settings” option and then select “Management” option and there you will find the option where you can change the WiFi access password for your WiFi extender device.
WPS | WiFi Protected Setup for Amped Extender Devices
If you want to add a new WiFi extender device to your home network, you can simply add your device using the WPS button setup. WPS setup is very common for most of the WiFi devices that are available across the world and Amped WiFi networks can also be managed using these advance devices.
You have to make sure that your router device can catch the WPS signals because both WiFi extender and router devices need to have the WPS feature for these setups. Press the WSP button for your Amped WiFi extender device and after few seconds press the WSP button for your router device.
The WPS status LED will blink at a very high speed and that means that the WPS configurations are going on well for your device. You can relocate your device to a new location and enjoy the WiFi connections for each corner of your home. Under the “More Settings” option for your Amped WiFi extender device you will get many advance features and you can use all these advance features for your device.
You use “Wireless Access Scheduling” option for your device and manage the WiFi connectivity for your devices. You can specify the time for which you want to automatically switch off the internet access for your home network. “User Access Controls” feature will allow you to block certain users from getting internet signals from your Amped WiFi extender device. Go for “More Settings” option and there you will find the “2.4 or 5 GHz WiFi Settings” option for your device.
- If you have entered http:// setup.ampedwireless.com web address and you are not getting login for your device then you will need to first need to make sure the your computer device is connected to the WiFi network with extension “Amped_REC15A_2.4”.
- You can use a different web browser because there is list of the web browsers that can’t support the login page for your Amped WiFi extender device.
- Power cycle your WiFi extender device and then try making login for your WiFi extender device once again.
2,010 total views, 0 views today