Extend your WiFi Coverage using Amped REC15A WiFi Extender Device
No one wants that they suffer with the slow internet connections at their home and that is the reason you must install the WiFi extender device for your device. Amped WiFi extender devices and full fill all your needs and there is an advance device that is available for all users. This wireless device is Amped WiFi REC15A extender device which is very famous these days. There are very few configurations that you will need to make for these advance devices most of the configurations will be possible using http:// setup.ampedwireless.com web address. In this article we are going to explain some very common facts that will blow your mind for sure.
Settings Up Amped WiFi REC15A extender device for your Network
When it comes to install this advance WiFi extender device for your device, you have to search a location in between your WiFi router and wireless devices that are placed to your network. This middle place will help your devices to catch the WiFi signals easily but during the first time configurations, you have to place your WiFi extender device near to the router device and later you can replace your device to a new location.
First provide power supply to your WiFi extender device and from your device search for the WiFi extension available with Amped_REC15. Connect your computer device with this network. Because there is no WiFi password by default so you can directly connect to the internet connections.
Open web browser and fill http:// setup.ampedwireless.com web address in the address bar. At the login window will the login user name and password for your device access. You can also use http:// 192.168.1.240 IP address for your device access. You are now at the dash board of the device and from there you can manage the configurations for your device. You can click on the “Scan” button and find the WiFi networks available. You must select the WiFi network that is available within the range of 70% for your device.
Amped WiFi REC15A extender device can be configured for 2.4 GHz and 5 GHz network and at the nest window you will get possibilities for these connections. Make sure that you can change the SSID or network name and password settings for your device from the same window. You can enter the security key and network ID for your new WiFi network. Click on the “Apply” button once all security settings are done for your Amped WiFi REC15A extender device.
Once the configurations start for your extender device, you will notice that your device get connected and disconnected to the 2.4 GHz and 5 GHz network continuously. You will need to choose the best WiFi band for your device at this stage. Once all configurations are done, you can relocate your device to a new location and connect your wireless devices to the internet access.