Firmware Upgrade for Amped Wireless REC10 WiFi extender device

Home  >>  setup.ampedwireless.com  >>  Firmware Upgrade for Amped Wireless REC10 WiFi extender device

Firmware Upgrade for Amped Wireless REC10 WiFi extender device

When you install the Amped WiFi router and extender device, you will find that you are receiving the notifications for the firmware update. Amped continuously provide the firmware update for the devices. You must update the firmware for your Amped device because this will make sure the advance activities for your devices.

You can download the firmware for Amped Wireless REC10 WiFi extender device in a zip format and later you can easily extract all these files. When you download the firmware zip file you will also find the text document that will help update firmware for your device.

If you want to update the firmware file manually for your device then download the file at your computer device. You will need to select the storage space where you want to save the firmware file for your WiFi extender device. Later you can upload the firmware file using setup Amped wireless dashboard.

Save the Current Configuration for your Amped Wireless REC10 WiFi extender device

You have to save the current settings for your WiFi extender device before you proceed for the firmware update process. You can backup your Amped Wireless REC10 WiFi extender device and save the configuration at your computer drive.

  • Go for “Save/Reload Settings” option for your device.
  • Click on “Save” button.
  • Give a name to the backup file and choose the file location where you want to save your file.

Now you are ready to update the firmware for your device and this will be possible from the 192.168.3.1 Amped wireless setup page. You will need to wait for few seconds or few minutes in some cases and make sure that you do not disturb the firmware update process.

Uploading the Previous Settings for your Amped Wireless REC10 WiFi extender device

If you find that after updating the firmware for your Amped wireless device, you device start delivering some problems then you can use the backup file and reflect the same settings for your device. Here are the steps for uploading the same pervious settings for your Amped WiFi extender device.

  • Access setup Amped wireless login page for your WiFi extender device.
  • Go for the backup options.
  • Click on the “Browse” button for your device.
  • Choose the file that you have downloaded for your device.
  • Click on the “Upload” button.

Now, the default settings will be uploaded to your Amped Wireless REC10 WiFi extender device and you can remove the firmware update for your device. In future, you can once again update the firmware for your device and make sure the accurate working for your devices.

Leave a Reply

Your email address will not be published. Required fields are marked *