Setting Up New Amped SR10000 WiFi Extender Device for your Home Network
If you want to setup a new WiFi extender device for your location then you will need to make sure that you can easily configure your WiFi extender and find a best location for placing your device to your home network. You must place the Amped SR10000 WiFi Extender Device at the middle place that will be between your router device and the dead zones that you are getting at your network.
After you find the location where you must place your WiFi extender device, now you are ready to manage the configurations for your devices. You will need to connect your Amped SR10000 WiFi Extender Device with a computer system and using that computer device you will access http:// setup.ampedwireless.com web address in future. Before your connect your WiFi extender device to your computer device, you have to make sure that you have connected the attachable antennas for your device because these antennas are provided so that you can easily access WiFi connections for login distance between your location.
You can use the Ethernet cable that you receive with the Amped SR10000 WiFi Extender Device and connect one end to the computer device LAN port and connect another end with the WiFi extender device itself. You can then provide power supply for your device and manage the configurations for your devices.
Default SSID for Amped Wireless Extender Devices
Default Password for Amped Wireless Extender Devices
Access the Login Page for Amped SR10000 WiFi Extender Device
Once the cable connections are done for your WiFi extender and computer device, you can access the Amped wireless login page at the same computer device. Here are the steps for accessing the smart window for your WiFi extender device.
- At the computer device that is connected to your amped WiFi extender device you will get facility for accessing the login page.
- Fill http:// setup.ampedwireless.com web address.
- You will get the setup window for your amped device and if you are getting login for your device then you can also use http:// 192.168.1.240 IP address.
If you are still not able to access the login page for your device then you will need to disconnect your computer device to the WiFi network and reconnect your device with the WiFi network that is available with “Amped_SR” extension and the default login password is “wireless” for accessing the login page for your device. Once you get access for the setup window, you can see the WiFi network that is currently available and the WiFi network that you want to extend for your network.